Dhuwur Precision ER Milling Chuck Set
ER milling chuck set punika presisi dhuwur collet chuck set, collets spring-loaded, supaya padha bisa nyekel sawetara ukuran.Set chuck iki cocog kanggo digunakake karo pabrik lan mesin presisi liyane.
| Urutan No. | Ukuran bolongan | PCS / SET | |
| inch | mm | ||
| ER16-8 in (mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6 ing (mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10 ing (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6 ing (mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12 in (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8 in (mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15 in (mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Utas saka Draw Bar
| Taper saka collet chuck | Utas saka garis tarik | |
| R8 | 7/16＂-20UNF | |
| 7:24 30 | M12×1.75 | 1/2＂-13UNC |
| 7:24 40 | M16×2.0 | 5/8＂-11UNC |
| 7:24 50 | M24×3.0 | 1＂-8UNC |
| MS2 | M10×1.5 | 3/8＂-16UNC |
| MS3 | M12×1.75 | 1/2＂-13UNC |
| MS4 | M16×2.0 | 5/8＂-11UNC |
| MS5 | M20×2.5 | 3/4＂-10UNC |
| MS6 | M24×3.0 | 1＂ -8UNC |
Mangga ngandhani thread collet chuck draw bar lan spesifikasi collets (metrik utawa inci)
Mangga ngandhani dawa shank lurus lan dia.
Kita seneng nyedhiyakake collet lan chucks kanthi shank lan jumlah sing beda-beda miturut kabutuhan sampeyan.
